Enrich

Special Price A$199.50 Regular Price A$399.00
In stock
SKU
CTG115-301
Enrich is a premium quality sealer which enhances and enriches the natural colour and beauty of the fine stone whilst imparting outstanding stain protection. Enrich beautifies the natural colouring found in a wide variety of natural stones including limestone, marble, granite, quartz, terracotta and slate.

Enrich
Enriching Sealer for Natural Stone
Enrich is a premium quality sealer which enhances and enriches the natural colour and beauty of the fine stone whilst imparting outstanding stain protection. Enrich beautifies the natural colouring found in a wide variety of natural stones including limestone, marble, granite, quartz, terracotta and slate.
- Solvent based
- Protects against water & oil contaminants
- Provides premium protection for up to 5 years
Colour: Light tan pH: N/A
Safety: Harmful Pack Size: 1Lt, 5Lt, 15Lt
BENEFITS
- Advanced Chemistry – Enrich is formulated using a precise blend of “nano – small particle” silicone technology which chemically reacts and bonds to the stone structure forming a long lasting, sub-surface repellent shield.
- Enriching Sealer – Enrich enhances the natural beauty of the fine stone by altering the reflection of the light off the substrate surface which creates a darkening and enriching effect drawing attention to the stone’s inherent beauty.
- Conceals – Enrich helps conceal scratches and imperfections.
- Premium Protection - Enrich provides premium protection against water and oil borne contaminants including;
Food and beverage stains,
Oil & greasy spills,
Biological growth such as mould & mildew,
Efflorescence,
Pollution and weathering
- Natural Look – Enrich enhances the natural appearance of the fine stone but does not change its surface texture nor does it impart a shine.
- Surface Safe – will not etch or cause discolouration of marble or fine stone.
- Vapour Permeable – won’t trap moisture. Allows natural stone to “breathe”.
- Safe to Use – Enrich does not contain chlorinated hydrocarbons and is not a suspected carcinogen.
SUBSTRATES
. Limestone and Marble
. Granite and Quartz
. Bluestone and Travertine
. Sandstone and Slate
. Terracotta and Pavers
Page 2
Enrich
Enriching Sealer for Natural Stone
Expected Wear – Enrich will provide premium protection for up to 5 years. However application methods, weather conditions, traffic and harsh cleaning methods will affect wear. Avoid use of solvents, strong acids and strong alkalis for extended sealer life.
It is recommended that the sealer be re-applied every 3 years where harsh conditions exist.
Note: Enrich is a permanent treatment and cannot be removed once applied.
HOW TO USE
Preparation
- New installations must be fully cured before application of Enrich (Min 48 hours)
- Existing stone, tile and grout must be totally clean, dry and chemical free.
- Coverage is 10 to 30m2 / Litre per coat. The coverage for the 2nd and 3rd coats is significantly higher.
Application:
1. Apply 1 to 2 coats of Enrich by generously saturating the surface using a polish applicator, roller or sprayer.
2. Using a squeegee or/and absorbent towelling or applicator, wipe off any sealer remaining on the surface after 10 minutes of each application.
3. Allow 30 minutes in between coats. Best results are obtained by applying the subsequent coat when the solvent from the first coat has evaporated.
4. Keep traffic off for 2 hours. Keep dry for 12 hours. Achieves a full cure in 24-48 hours.
SAFETY
. Flammable according to the Australian Dangerous Goods Code.
. Hazardous according to the criteria of Worksafe Australia.
. Read and understand the Material Safety Data Sheet before using.
form-get-image