Heavy Duty Tile and Grout Cleaner

A$29.00
In stock
SKU
CTG02-055
Aqua Mix Heavy-Duty Tile and Grout Cleaner is a concentrated high-alkaline cleaner and degreaser. Effectively removes grease soap scum body oil mildew stains and algae from areas that have been neglected or subjected to heavy use.
Aqua Mix Heavy-Duty Tile and Grout Cleaner is a concentrated high-alkaline cleaner and degreaser. Effectively removes grease soap scum body oil mildew stains and algae from areas that have been neglected or subjected to heavy use. Heavy-Duty Tile and Grout Cleaner is especially formulated to strip off synthetic and acrylic waxes and floor finishes.

USES:
Recommended for use on:
• All Types of Ceramic Tile
• Grout Joints
• Natural Stone
• Cultured Stone
• Linoleum
• Resilient Flooring
• Cement
• Other Masonry Surfaces

COVERAGE:
• When diluted one gallon (3.785 L) yields up to 6 gallons (23 L) of cleaning solution which will clean approximately 150 to 600 sq. ft. (15 m2 to 55 m2)

METHOD OF APPLICATION:• Avoid skin contact
• Read entire label before using
• TEST A SMALL AREA according to application instructions to determine desired results
• Sweep or vacuum surface
• Mix Heavy-Duty Tile and Grout Cleaner as follows:
CLEANING: Light soil build up mix 1 part to 5 parts water; moderate soil build up mix 1 part to 3 parts water
STRIPPING: Mix 1 part to 2 parts water
• Apply solution to surface with mop or sponge applicator. Allow to dwell 3 to 5 minutes for cleaning or 5 to 10 minutes when stripping waxes or finishes.
• Agitate with synthetic mop scrub brush or scrub machine. Mop up dirty solution.
• Rinse mop and change cleaning solution at least every 100 sq. ft. (10 m2) or as needed
• Rinse thoroughly with clean water

LIMITATIONS:
• Do not allow Heavy-Duty Tile and Grout Cleaner to come in contact with any non-recommended surface

HANDLING AND STORAGE:
• Close container after each use
• Store in original container only
• Unused stored product is freeze-thaw stable

DANGER:
• KEEP OUT OF REACH OF CHILDREN
• May cause burns
• Harmful if swallowed
• Contains Sodium Hydroxide (CAS #1310-73-2)
• DO NOT ALLOW PRODUCT TO COME IN CONTACT WITH SKIN OR CLOTHING AS BURNS MAY RESULT
• Avoid contact with eyes and mucous membranes
• Do not take internally
• Rubber gloves and eye protection should be worn during application. Promptly remove clothing soaked in solution.
• IF INGESTED: Do not induce vomiting. Drink 1 to 2glasses of water. Seek immediate medical attention.
• EYE CONTACT: Flush immediately with water for 15minutes. Seek medical attention.
• SKIN CONTACT: Flush immediately with water thenwash with vinegar
form-get-image