Replenish Ultra

A$61.80
In stock
SKU
CTG115-0122
Replenish Ultra is a proprietary restoration cleaner for neglected, black grout lines and tiles. Replenish Ultra’s low pH formula contains no hydrochloric, hydrofluoric, phosphoric or sulphamic acids, but is more powerful and effective, yet safer and pleasant to use. Replenish Ultra makes quick work of mineral scale, cement/grout smear, efflorescence, soap scum and embedded stains. It provides tough action on general grime and is excellent for grout restoration ahead of applying a sealant.

Replenish Ultra is a proprietary restoration cleaner for neglected, black grout lines and tiles. Replenish Ultra’s low pH formula contains no hydrochloric, hydrofluoric, phosphoric or sulphamic acids, but is more powerful and effective, yet safer and pleasant to use. Replenish Ultra makes quick work of mineral scale, cement/grout smear, efflorescence, soap scum and embedded stains. It provides tough action on general grime and is excellent for grout restoration ahead of applying a sealant.
Safety First: The advanced low pH technology of Replenish Ultra
gives optimum performance with outstanding low toxicity and OHS ratings.

Colour Green
pH 1 to 1.5 RTU
Safety Irritant
Pack Size 5Lt, 15Lt, 200Lt

BENEFITS

Restoration Power – Replenish Ultra has the muscle to tackle years of efflorescence, mineral scale and alkaline detergent build-up. Speciality penetrating agents ensure quick and effective action saving you time and effort.
Grout Specialist – overcomes stubborn grout stains, embedded soils and cement/grout smear. Always use Replenish Ultra to prepare grout ahead of applying grout sealer.
A Total Solution – unparalleled cleaning punch, yet safe to use and non-corrosive on non-ferrous metals (eg Aluminium) when used as recommended.
SUBSTRATES – Safe on all man-made tiles, use with care on sandstone, quarry tiles, terracotta and slate.
Not recommended for use on acid sensitive surfaces including marble, limestone, granite and other natural stone. Although unlikely to mark non-ferrous metals (e.g. Aluminium), always pre-test before use.

 

WHERE TO USE

Anywhere there are dirty tiles. Especially good in restoration applications and washrooms, showers and pool surrounds, grout smear removal and builders cleans.

 

HOW TO USE

Always pre-test the cleaning solution on the surface to be cleaned to check for any substrate instability or incompatibility with Replenish Ultra. Observe all safety directions and read and understand the MSDS before use.

Usage: (Mineral scale build-up, efflorescence, cement residues and heavy duty applications).

1.   Mix 1 part Replenish Ultra with 10 to 30 parts water (100-30ml/Litre). Apply with a clean mop and bucket, rotary scrubber or auto-scrubber. Apply only to a limited area at a time. Do not allow solution to dry.

2.   Scrub thoroughly with applicable nylon scouring/floor pad or brush.

3.   Allow 10 to 30 minutes dwell time and re-agitate.

4.   Extract/Pick up resultant slurry with extraction equipment.

5.   Neutralize remaining residues by rinsing thoroughly with a 1:300 solution (300ml/10Lt) of TileClenz.

Usage: (Grout residues and light duty applications)

1.   Mix 1 part Replenish Ultra with 80 to100 parts water (10-12ml/Litre) Apply with a clean mop and bucket, rotary scrubber or auto-scrubber. Apply only to a limited area at a time. Do not allow solution to dry. Apply solution with a mop and bucket, auto scrubber or pressure washer.

2.   Scrub thoroughly with applicable nylon scouring/floor pad or brush.

3.   Allow 10 to 30 minutes reaction time and re-agitate.

4.   Rinse well with clean water.
SAFETY
• Not classified as dangerous according to the Australian Dangerous Goods code.
• Classified as irritant according to the criteria of Worksafe Australia.
• Observe all safety recommendations made on the product label and MSDS.

form-get-image